PIPE SUPPORTS WITH AND WITHOUT COLLAR
- font size decrease font size increase font size
Specifically designed to ensure a correct insulation thickness where joints are made.
The PIR central section, which covers the whole circumference and is attached to two K-FLEX insulating material sections, ensures a perfect continuity of the vapour barrier. Longitudinal sealing is obtained by means of the self-adhesive overlap. The external cover is in PVC. The support is also available with a collar and a special metal support which, when fixed to the supporting framework, ensures greater overall installation stability.
Measurements:
Thicknesses mm: 13, 19, 25, 32
Tube diameter mm: from 18 to 160; inches: from 3/4” to 5”
Technical Characteristics | |
Central section in PIR | Density 120 kg m3 |
Compression resistance | 1350 kPa |
Temperature range | -45°C +105°C |
Thermal conductivity | λ 0,036 W/(m•K) a 0°C |
Maximum stockage time | 1 year |
Colour | Black |
Permeability to vapour | ÎĽ 7000 |
Diameter and thickness tolerance | +1 mm / +/- 1 mm |
The insulating supports are also available in K-FLEX ECO, SOLAR, AL CLAD, COLOR, in the same measurements as those indicated for K-FLEX ST.
![]() |
![]() |
![]() |
![]() |
![]() |
||||
1 - Place the insulating support around the pipe. |
2 - Spread K-FLEX adhesive onto the half-collars. |
3 - Seal lengthways using the adhesive overlap. |
4 - Fix the collar around the support. |
5 - Glue the support to the insulating material. |