BevEx PE Ultra

font size decrease font size increase font size
Print
Email

PE ULTRA

PE Ultra tube is manufactured by BevEx from a specially formulated blend of polyethylene materials using optimised process conditions, resulting in an ultra-smooth surface; the raw materials are 100% virgin ensuring compliance with both European and American regulations regarding articles for food use. Research by a leading UK University has demonstrated the benefits of these developments, and surface analysis techniques were employed to demonstrate the improved result.

This email address is being protected from spambots. You need JavaScript enabled to view it.

Choose the language of the BevEx brochure:
English Version
Versione Italiana
Deutsche Version
Version Française

Available in cut lengths and as standard 100 metre coils and spools/drums, in natural, colour tints, and two or four coloured stripes.
Also available in solid colours for gas applications.

IMPERIAL (NOMINAL) ID X OD	METRIC (NOMINAL) ID X OD	SAFE WORKING PRESSURE @ 20°C
IMPERIAL (NOMINAL) ID X OD	METRIC (NOMINAL) ID X OD	PSI LBF/IN²	BAR KG/CM²
0.117” x 3/16”		230	15
0.170” x 1/4”		160	11
	4mm x 8mm	175	12
0.212” x 5/16”		170	11.5
0.265” x 3/8”	6.7mm x 9.5mm	160	11
3/8” x 1/2”	9.5mm x 12.7mm	150	10
	11.5mm x 15mm	160	11
	12.7mm x 17.4mm	175	12

Applications	Extensively used throughout the beverage industry by soft drinks and beer companies for product and cooling applications. Also used for gas lines. Meets EU Directive 72/2002 for food contact use. See technical data sheet for comprehensive information.
Features	SK, NSF and FDA approved; good flexibility. Ultra-smooth inner surface; reduction in formation of biofilm; low adhesion of bacteria and yeast; extended cleaning cycles. designed for use with OD push-fit connectors/fittings
Operating temperature	-10°C to +60°C. Temperatures outside this range not recommended.
K-FLEX reserves the right to change data and technical requirements without notice.