Menu

K-FLEX ALU AR CW TAPE

Foil-Scrim backing, combined with cold weather solvent acrylic adhesive, protected by an easy-release silicone release paper.
Cold Weather version (low temperatures).

FEATURES:
> Foil-Scrim provides excellent reflection of both heat and light.
> High quality adhesive with strong adhesion and holding power offers reliable and durable Foil-Scrim Facing for joints and seams sealing in HVAC and ductwork applications.
> Low moisture vapor transmission rate makes K-FLEX ALU AR 107 an excellent vapor barrier.
> Service Temperature range from -30 ~ +120 °C (-22~ +248 °F).

APPLICATIONS:
HVAC industry for joining and sealing Foil-Scrim Facing laminated blankets / duct board / pipe section joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

STORAGE & SHELF LIFE:
12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight

SURFACE PREPARATION:
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

PRODUCT USE:
It is essential that the user evaluate the products to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on products between +10 ~ +40°C (+50 ~ +105 °F).

 

 Thickness

 43 - 50 Micron

 Width

 50 - 75 - 100 mm

 Length

 50 m

K-FLEX ALU AA 107 CW
  Metric English Test method
Backing thickness 43 Micron 1.7 Mil PSTC-133 / ASTM D 3652
Total thickness 83 Micron 3.3 Mil PSTC-133 / ASTM D 3652
Adhesion to steel 15 N/25mm 52.5 Oz./In. PSTC-101 / ASTM D 3330
Rolling ball tack test 5 cm 2.0 In. PSTC-6 / ASTM D 3121
Tensile strength 100 N/25mm 22.7 Lb/In PSTC-131 / ASTM D 3759
Elongation 3.0 % 3.0 % PSTC-131 / ASTM D 3759
Service temperature -30 ~ +120 °C -22 ~ +248 °F  -
K-FLEX ALU AA 107 PLUS CW   
  Metric English Test method
Backing thickness 50 Micron 2.0 Mil PSTC-133 / ASTM D 3652
Total thickness 90 Micron 3.6 Mil PSTC-133 / ASTM D 3652
Adhesion to steel 15 N/25mm 52.5 Oz./In. PSTC-101 / ASTM D 3330
Rolling ball tack test 5 cm 2.0 In. PSTC-6 / ASTM D 3121
Tensile strength 120 N/25mm 27.3 Lb/In PSTC-131 / ASTM D 3759
Elongation 3.0 % 3.0 % PSTC-131 / ASTM D 3759
Service temperature -30 ~ +120 °C -22 ~ +248 °F  -

The physical properties of the products shown above are obtained from test methods defined by Technical Standards Authorities, Quality Assurance and Technical Service Departments and do not represent a guarantee of product performance. Individual tapes may vary from these parameters and in all applications the end user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.

L’ISOLANTE K-FLEX reserves the right to change data and technical requirements without notice.
Contact us for more information.

 

back to top