K-FLEX BLECH MT-CU
- font size decrease font size increase font size
99.5% PURE ALUMINIUM SHELL and 90° ELBOWS with a thickness ranging from 0,6 and 0,8.
MT 500: male and female ball swaged edges calendered tube, with reinforced length-wise drilled sealing system.
Measurements:
Tubes Ø 70 = Length 500 mm
All the others = Length 1000 mm
CU 501: 90° preformed segmented elbows with female-female ball swaged edges.
Application on tubes:
> The MT 500 tube diameter is slightly greater than that of the corresponding CU 501 elbow, which makes the connection between the two parts much easier.
> The edges of the joints are fixed together by using the short screws in the holes provided.
Application of CU501 elbows:
A - Open the segments of the elbow and place them around the insulated pipe.
B - After the sections have been correctly positioned, seal the elbow with short screws using the holes provided.
C - Connect the MT 500 tube by attaching male edge to female edge.
